Every sticker we sell is cut from automotive-grade vinyl. It is the same class of material used for vehicle graphics and fleet livery, and it is why a decal from us survives a Dhaka summer and a full monsoon without curling.
The vinyl
- Waterproof and weatherproof. Rain, wash bays and road spray do not affect it.
- UV resistant. Colours hold rather than fading to pink or grey after one dry season.
- Rated 3 to 7 years outdoors. Where it lands in that range depends on sun exposure, the surface it is on and how you wash it. A decal on a boot lid lasts longer than one on a front mudguard.
- Paint-safe adhesive. It grips hard in heat and rain, and still releases from cured factory paint when removed properly.
Finishes
Gloss is the standard. It is the most readable from a distance and the easiest to wipe clean.
Matte suits matte-wrapped bikes and blacked-out builds. It shows fingerprints more and is slightly harder to clean.
Cut types
Cut letters. The design is cut straight out of solid colour vinyl with no background, so your paint shows through the gaps. Cleanest look, best on a panel that contrasts with the vinyl colour.
White border die-cut. The plotter follows the outline of the artwork and leaves a thin white contour around it, usually 2 to 5 mm. This is what makes a dark design readable on dark paint or tinted glass, and it gives fine details an edge to grip, so they are far less likely to lift.
Tank pad decals
Tank pads are a different stock: thicker, layered and domed. They sit between your knees and take scuffing that flat vinyl would not survive.
Transfer tape
Anything with separate letters or multiple pieces ships with transfer tape over the top, so the whole design lands aligned in one go instead of letter by letter.
What we do not use
We do not print on paper stock, on laminated photo paper, or on the thin craft vinyl sold for indoor use. Those look identical in a photo and fail within one season on a vehicle.
Care
Hand wash with soap and water. Keep a pressure washer at least 30 cm away and never aim it straight at an edge. Avoid petrol, thinner and alcohol-based polish directly on the decal; they will dull the surface over time.
